|
 12-11-2006, 08:53 AM | #1 |
| Administrator Join Date: Nov 2004 Posts: 2,952  |  Everything You Need To Know About The Screws Used on The PC There has been a new article posted. Title: Everything You Need To Know About The Screws Used on The PC URL: http://www.hardwaresecrets.com/article/405 Here is a snippet: "When you buy a case for assembling a new PC it comes with several screws and other small components. Even seasoned technicians have trouble in telling what is the exact use of each screw that comes wi..." Comments on this article are welcome. Best regards, Hardware Secrets Team http://www.hardwaresecrets.com |
 |  |
 Sponsored Links |
This advertisement is only shown to unregistered users. Register today and stop seeing this ad. |
| 12-19-2006, 07:52 AM | #2 |
| Junior Member Join Date: Dec 2006 Ottawa, Ontario Posts: 1 | Corrections to terminology Wherever the term 'coarse' is used throughout the article, the correct term is 'thread', except in the meaning of the initials 'UNC', which stands for 'Unified Coarse' and not 'United National Coarse'. This can be confirmed by Googling on 'UNC'  -Bob Anderson |
| | |
| 12-19-2006, 03:21 PM | #3 |
| Administrator  Join Date: Oct 2004 USA Posts: 2,553 | Hi, You are absolutely right, I am correcting this right away, thanks for letting me know! Once again, thank you very much. Best regards, Gabriel. |
| | |
| 10-30-2007, 07:26 AM | #4 |
| Junior Member Join Date: Oct 2007 Posts: 2 | Little precision Hi all, First sorry for my poor english :-) I just wanted to point out that, this entire article has been copied (including photos presenting Hardware Secret logo) from this (french) page: http://www.megatuto.fr/composant/boi...html?Itemid=45 Maybe i didn't watch closely enough, but I didn't found any notice of this fact on your website... I'm sure the original article owner would be grateful if you could put such a notice... Kind regards M. |
| | |
| 10-30-2007, 07:42 AM | #5 | |
| Junior Member Join Date: Oct 2007 Posts: 2 | Quote:
M. | |
| | |
| 11-01-2007, 04:09 PM | #6 |
| Administrator Join Date: Oct 2004 USA Posts: 2,553 | Well, It is exactly the other way around... These guys were the one that copied and pasted our tutorial... It is a shame such things happen, people instead of creating, copying... It is also illegal. Can you help us entering in contact with the owner of this website asking them to take down this plagiarism? I can't read French, so I couldn't find an e-mail or contact form. Thanks, Gabriel. Last edited by Gabriel Torres; 11-01-2007 at 04:12 PM. |
| | |
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
Linear Mode
