Hardware Secrets Forums


Go Back   Hardware Secrets Forums > Hardware > Storage



Reply
 
Thread Tools Search this Thread Display Modes
Old 01-06-2014, 05:05 PM   #1
Kneed2No
Junior Member
 
Join Date Jan 2014
Posts: 1
Kneed2No is on a distinguished road

Default Selecting a DIrection for RAID 1 Rebuilding

Hello,

I use a RAID 1 hard drive mirroring system. I have three identical hard drives. I keep 2 in my computer in the RAID 1 system. Once a month, I physically remove one hard drive and replace it with the stored one. Both hard drives were at one time in a RAID 1 system. I then need to do a Control-I (Intel board) to get the system to rebuild.

My problem is this: There will be two hard drives now in my computer. One will have older data and the other will have current data. How can I tell the computer which hard drive is the "master" to rebuild from and which is the hard drive that is rebuilt?

K2N

Kneed2No is offline   Reply With Quote
new Sponsored Links

Old 01-07-2014, 06:08 AM   #2
Gabriel Torres
Administrator
 
Gabriel Torres's Avatar
 
Join Date Oct 2004
USA
Posts: 4,415
Gabriel Torres is on a distinguished road

Default

I believe that when you enter the setup utility, it will ask you this information.
__________________
Editor-in-Chief
Hardware Secrets
http://www.hardwaresecrets.com
Gabriel Torres is offline   Reply With Quote
new Sponsored Links

Reply

Share This Thread

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump


All times are GMT -8. The time now is 02:50 PM.


vBulletin Security provided by vBSecurity (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. ()
2004-12, Hardware Secrets, LLC. All rights reserved.